CONTACT US

EN779 ASHRAE 52.2 ISO 16890 Width (mm) Height (mm) Depth (mm) Initial Pressure Drop (Pa) Air Flow (m3/hr) No of Pockets
G4 MERV 8 ISO Coarse 80% 595 595 200 50 3400 6
G4 MERV 8 ISO Coarse 80% 595 595 300 45 3400 6
G4 MERV 8 ISO Coarse 80% 595 595 500 40 3400 6

Specification

Application

Gas Turbine, Compressor and harsh environments

Filter Frame

Polyurethane (PU)

Media

Hydrophobic Synthetic Media

Max Temperature (°C)

70°C

Recommended Final
Pressure Drop (Pa)

385

Related Products

Dust Collector

Spectra Dust Collector filter pad is  progressive density fiber glass  allows the pollutant to penetrate deep into the media, along with the harmless tackifier over the fibers arrest the pollutant and make it stick together. The filter pads can be constructed  with suitable frames depend on the use of the application. 

Spectra Drop Shield

Spectrum Drop Shield rigid filters serve as efficient pre or final filters in air intake systems of Gas Turbines, in any environmental condition (including offshore, marine) and in any climate (including tropical). They efficiently remove airborne particulate matter but also snow, mist and fog, acting as a filter and a coalescer in one. DS rigid filters are specially designed for the elimination and drainage of free water and air borne salt crystals. Where subsequent final filters are placed, they protect them not only from coarse dust but also from running in wet conditions, thus significantly prolonging their life and increasing their operational safety.

Spectra Microvee TM

Spectrum Microvee filters are rigidity constructed filters for coarse and fine particle capturing can be used as both primary and secondary stage filters depends on the class it is rated. The unique filter media is designed with layers of synthetic mesh that has  non-woven sandwiched in between. The pleats are V shaped and rounded well to increase the dust arrestance of filters. Media is further enforced by metal expanded mesh to give extra rigidity to pleats so that peats would retain their shape at higher pressure drop. Equal spacing in pleats is maintained by use of metallic spacers.

Spectra Pre-TM

Spectra Pre-TM filters are used for supply, exhaust and circulating air filtration in a Turbine application which built for high dust holding capacity, used in all industrial gas turbine and compressor application. Where subsequent final filters are placed, they protect them from coarser dust and fog, thus significantly prolonging their life and increasing their operational safety.